RollenceLogo

Hi there ๐Ÿ‘‹

Need help? Search our help center for answers or start a conversation:

Help Center

New Conversation

We typically reply in a few minutes

Support Customer Support
Customer Support
Support
Welcome to our site, if you need help simply reply to this message, we are online and ready to help.
Support

Select Emoji

CALCULATE YOU TILES

Tiles Calculator

Box Calculation
Feet
Feet
Calculations
Sq. M
Sq. Ft

This may vary on basis of your actual need. This is only approx calculation.

X FT
Y FT

Tips

  • โœ” Length and Width Dimensions are in feet.
  • โœ” 1 Feet = 0.3048 Meter
  • โœ” 1 Meter = 3.28084 Feet
Overview

Tile Calculator: How Many Tiles Do You Need?

This tile calculator tells you how many tiles a room needs and how many boxes to order. It covers all ten Rollence sizes from 600x600 mm to 1200x2800 mm. Rollence Granito makes these GVT and PGVT tiles at its factory in Matel, Wankaner, Morbi, Gujarat.

The tile estimator multiplies your room length and width to get the floor area, converts it to square metres and divides it by the area one box covers. It rounds up to a whole box, because nobody can buy half a box, and then shows the number of tiles in those boxes.

In the Morbi market, GVT in 600x600 mm, 600x1200 mm, 800x800 mm, 800x1600 mm and 1200x1200 mm costs about Rs. 60 to Rs. 140 per sq.ft, and the long formats cost about Rs. 150 to Rs. 600 per sq.ft. These are market ranges and not a Rollence quote. Every tile absorbs 0.5% water or less.

How to Use

How to Use the Tile Calculator

1

Enter the room size

Type the length and width of the floor in feet. Use the longest straight run of each wall.

2

Pick the tile size

Choose one of the ten Rollence sizes, then press Calculate.

3

Read area, tiles and boxes

The tool shows the area in sq.m and sq.ft, the tiles needed and the boxes to order. Add 10% to 15% for wastage before you buy.

Measure twice before you use the tile calculator. A 12 ft room is 3.66 m, because 1 foot is 0.3048 metre, and a few centimetres of error across a long wall can change the tile count by one row. Measure at floor level and not along the skirting, since walls are rarely perfectly square. For an L-shaped room, split it into two rectangles, calculate each one and add the results.

The Formula

The Tile Formula Explained

The tile estimator uses the same method a tile contractor follows on site. Work out the floor area, work out the area one tile covers, divide the first by the second, then add the wastage. Anyone who wants a tile square footage calculator can use the same sum in square feet, as long as the tile area is in square feet too.

Formula

Tiles = (room area รท area of one tile) ร— (1 + wastage)

Worked example: a 12 ft x 10 ft room is 11.15 mยฒ. A 600x1200 mm tile (2x4 ft) covers 0.72 mยฒ, so the room needs 16 tiles, or 8 boxes of two, before wastage. Add 10% and the count rises to 18 tiles, which is 9 boxes. Those 18 tiles cover about 140 sq.ft, so the market cost is about Rs. 8,400 to Rs. 19,500 for GVT.

Wastage to Add
LayoutWastage to addWhy
Straight layout, simple room10%Cuts at the walls and a few broken pieces
Diagonal or herringbone layout15%Every edge piece is a cut and offcuts rarely reuse
Large hall with very few cuts5% to 8%Fewer edges, but keep spares from the same batch
Small room with large tiles10% to 15%A long tile cut for a short wall leaves a waste piece

Always round up. A room that needs 15.4 tiles needs 16, and buying the last tile from a later batch is how shade mismatches happen. Keep one or two spare unopened boxes from the same batch for future repairs, because production lots of the same design can differ slightly in shade.

Reference Table

Tile Calculator Reference: Tiles Needed per 100 mยฒ

This reference table shows how the tile count and the grout run fall as the tile grows. A 600x600 mm tile needs 278 pieces for 100 mยฒ, while a 1200x1800 mm tile needs only 47. Fewer tiles also means fewer joints to fill, and a shorter grout run on shiny finishes where every joint shows.

Tiles per 100 mยฒ by Size
Size (mm)Size (ft)Tiles per 100 mยฒWith 10% wastageGrout run per 100 mยฒ
600x6002x2278306About 333 m
600x12002x4139153About 250 m
800x8002.6x2.6157173About 250 m
800x16002.6x5.27987About 188 m
800x24002.6x7.95359About 167 m
800x30002.6x9.84247About 158 m
1200x12004x47077About 167 m
1200x18004x64752About 139 m
1200x24004x83539About 125 m
1200x28004x9.23033About 119 m

For a living room, 600x1200 mm and 800x800 mm are the usual choices. Halls and showrooms move to 800x1600 mm and above. Prices per sq.ft rise with size, so compare the cost of the whole room and not the cost of one tile.

Tile Size

Pick the Tile Size Before You Run the Tile Calculator

Bedrooms, kitchens, passages

Under about 15 mยฒ

600x600 mm or 600x1200 mm. Small cuts, little waste and easy carrying up a staircase.

Living and dining rooms

15 to 40 mยฒ

600x1200 mm or 800x800 mm. Fewer joints without the weight of a long tile.

Halls, showrooms, lobbies

Over 40 mยฒ

800x1600 mm and above. The room should take at least four whole tiles across.

PGVT is a wall tile only and should not be laid on any floor, so enter wall areas for PGVT and floor areas for GVT in the tile calculator.

Limits

What the Calculator Cannot Tell You

The tile calculator counts tiles, not the rest of the job. It does not include wastage, adhesive, grout, spacers, levelling clips or skirting. In bathrooms, balconies and any wet area, add epoxy grout to the shopping list, because cement grout absorbs water through a Gujarat monsoon and stains.

It also assumes a plain rectangle laid in a straight grid. A room with a column, a bay window or a pattern that must match across tiles will need more. Ask the fitter to mark the layout on the floor first, then use the tile estimator as a cross-check. For packing sizes and weights, the packing details page lists the published figures.

Tile weight matters on upper floors. A 600x1200 mm tile weighs about 15 kg and an 800x1600 mm tile about 27 kg, so the number of boxes affects how many trips and how many people the delivery needs.

Plan Your Order

Confirm Shade With Free Pieces

Once the tile calculator gives you a count, check the colour before you place the order. Rollence Granito delivers free samples to your door, so you can hold a piece against your own wall and daylight, and the enquiry form takes about a minute to fill in with your city and tile size.

Request Samples
Quick Facts

Quick Facts on Tile Quantity from Morbi

How many tiles cover a 12x10 ft room?

A 12x10 ft room (11.15 mยฒ) needs 16 tiles of 600x1200 mm (2x4 ft) before wastage and 18 with 10% added. At Morbi market rates of Rs. 60 to Rs. 140 per sq.ft for GVT, those 18 tiles cost about Rs. 8,400 to Rs. 19,500. The body absorbs 0.5% water or less.

How should I plan tile quantity for a Gujarat monsoon site?

Order the full quantity from one batch before the monsoon, because heavy rain in Gujarat can slow dispatch from Morbi and shade can differ between runs. A 100 mยฒ floor of 800x1600 mm (2.6x5.2 ft) tiles needs 79 pieces, or 87 with 10% wastage. IS 15622 sets the water absorption limit for vitrified tiles, and Rollence tiles absorb 0.5% or less.

FAQ

Frequently Asked Questions

How do I calculate how many tiles I need for a room?

Divide the room area by the area of one tile, then add wastage and round up. A 12x10 ft room is 11.15 mยฒ, and a 600x1200 mm tile covers 0.72 mยฒ, so the room needs 16 tiles, or 18 with 10% wastage. The tile calculator above does the area and box sum for you.

How much wastage should I add when buying tiles?

Add 10% for a straight layout and 15% for a diagonal layout. Cuts at the walls and a few broken pieces use up the extra tiles. In a large hall with very few cuts, 5% to 8% can be enough, but keep spare tiles from the same batch.

How many tiles do I need for 100 mยฒ?

It depends on the size: 278 tiles of 600x600 mm, 139 of 600x1200 mm, 79 of 800x1600 mm and 47 of 1200x1800 mm. Add 10% for wastage. The reference table above lists all ten Rollence sizes, with the grout run for each.

How do I convert feet to metres for a tile calculation?

Multiply feet by 0.3048 to get metres. A 12 ft wall is 3.66 m, and a 10 ft wall is 3.05 m. To go back, multiply metres by 3.28084. The tile calculator takes feet and shows the area in both sq.ft and sq.m.

How many boxes of tiles do I need?

Divide the tile count by the pieces in one box and round up. Rollence packs 2 tiles in each box for 600x1200 mm, 800x1600 mm and 1200x1200 mm, so 18 tiles need 9 boxes. The tile calculator shows the box count for every size, and the packing details page lists pieces and weight per box.

Does the tile calculator include grout and adhesive?

No, the tile calculator counts tiles only. Adhesive, grout, spacers and levelling clips are bought separately. Use epoxy grout in bathrooms, balconies and kitchens, because it does not absorb water or oil, and it stays sealed through the monsoon where cement grout stains.

How much will the tiles cost per sq.ft?

Morbi market prices for GVT run from about Rs. 60 to Rs. 140 per sq.ft for 600x600 mm up to 1200x1200 mm, and about Rs. 150 to Rs. 600 per sq.ft for the long formats. Multiply the sq.ft from the calculator by these rates for a budget. It is a market guide, not a Rollence quote.

Keep Exploring

Related Rollence Pages