RollenceLogo

Hi there ๐Ÿ‘‹

Need help? Search our help center for answers or start a conversation:

Help Center

New Conversation

We typically reply in a few minutes

Support Customer Support
Customer Support
Support
Welcome to our site, if you need help simply reply to this message, we are online and ready to help.
Support

Select Emoji

Rollence Granito DG Matt + Carving finish tiles made in Morbi, Gujarat
Made in Morbi, Gujarat

Carving Tiles (DG Matt + Carving): A Textured Matt Surface You Can Feel

DG Matt + Carving finish GVT and PGVT Group BIa
8 Finishes in the range
6 Collections
0.5% Water absorption or less
BIa ISO 13006 class
Bellisimo Grey Bellisimo Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Bellisimo Grey

DG Matt + Carving, Glossy
Bianco Luna Bianco Luna
1200x1800 mm, 800x1600 mm, 600x1200 mm

Bianco Luna

DG Matt + Carving
Classico Bianco Classico Bianco
1200x1800 mm, 800x1600 mm, 600x1200 mm

Classico Bianco

DG Matt + Carving, Glossy
Clover Grey Clover Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Clover Grey

DG Matt + Carving
Clover light grey Clover light grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Clover light grey

DG Matt + Carving, DG Matt
Fresco Bianco Fresco Bianco
1200x1800 mm, 800x1600 mm, 600x1200 mm

Fresco Bianco

DG Matt + Carving, Glossy, DG Matt, Marble
Fresco Grey Fresco Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Fresco Grey

DG Matt + Carving, Glossy, DG Matt, Marble
Lewis Grey Lewis Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Lewis Grey

DG Matt + Carving
Lewis Pine Lewis Pine
1200x1800 mm, 800x1600 mm, 600x1200 mm

Lewis Pine

DG Matt + Carving
Limar Artistic Limar Artistic
1200x1800 mm, 800x1600 mm, 600x1200 mm

Limar Artistic

DG Matt + Carving, Glossy
Limer White Limer White
1200x1800 mm, 800x1600 mm, 600x1200 mm

Limer White

DG Matt + Carving, Glossy, DG Matt, Marble
marfil mink marfil mink
1200x1800 mm, 800x1600 mm, 600x1200 mm

marfil mink

DG Matt + Carving, Glossy
Monarc Beige Monarc Beige
1200x1800 mm, 800x1600 mm, 600x1200 mm

Monarc Beige

DG Matt + Carving, DG Matt
Monarc Light Grey Monarc Light Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Monarc Light Grey

DG Matt + Carving
Morion Brown Morion Brown
1200x1800 mm, 800x1600 mm, 600x1200 mm

Morion Brown

DG Matt + Carving
Morion Grey Morion Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Morion Grey

DG Matt + Carving, Glossy, DG Matt
Tivoli Crema Tivoli Crema
1200x1800 mm, 800x1600 mm, 600x1200 mm

Tivoli Crema

DG Matt + Carving, Glossy
Trozen Dove Trozen Dove
1200x1800 mm, 800x1600 mm, 600x1200 mm

Trozen Dove

DG Matt + Carving
Belgian Crema Belgian Crema
1200x1800 mm, 800x1600 mm, 600x1200 mm

Belgian Crema

DG Matt + Carving, Glossy, DG Matt, Marble
Fresco Bianco Fresco Bianco
1200x1800 mm, 800x1600 mm, 600x1200 mm

Fresco Bianco

DG Matt + Carving, Glossy, DG Matt, Marble
Morion Light Grey Morion Light Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Morion Light Grey

DG Matt + Carving, Glossy, DG Matt, Marble
Armania light grey Armania light grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Armania light grey

DG Matt + Carving, Glossy
Arregio Mint Arregio Mint
1200x1800 mm, 800x1600 mm, 600x1200 mm

Arregio Mint

DG Matt + Carving, Glossy
Belgian Crema Belgian Crema
1200x1800 mm, 800x1600 mm, 600x1200 mm

Belgian Crema

DG Matt + Carving, Glossy, DG Matt, Marble
Bellisimo Bellisimo
1200x1800 mm, 800x1600 mm, 600x1200 mm

Bellisimo

DG Matt + Carving, Glossy, Marble
Boden Grey Boden Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Boden Grey

DG Matt + Carving, Glossy, DG Matt, Marble
Burberry Biege Burberry Biege
1200x1800 mm, 800x1600 mm, 600x1200 mm

Burberry Biege

DG Matt + Carving, Glossy
Calacatta Monet Calacatta Monet
1200x1800 mm, 800x1600 mm, 600x1200 mm

Calacatta Monet

DG Matt + Carving, Glossy
Cicilia Caramel Cicilia Caramel
1200x1800 mm, 800x1600 mm, 600x1200 mm

Cicilia Caramel

DG Matt + Carving, Glossy
fresco bianco fresco bianco
1200x1800 mm, 800x1600 mm, 600x1200 mm

fresco bianco

DG Matt + Carving, Glossy, DG Matt, Marble
Fresco Grey Fresco Grey
1200x1800 mm, 800x1600 mm, 600x1200 mm

Fresco Grey

DG Matt + Carving, Glossy, DG Matt, Marble
Overview

DG Matt + Carving Tiles at Rollence

Carving tiles are matt tiles with a surface that has been carved into a relief, so the pattern is something you can feel with your hand and not only see. The texture catches light at an angle and gives a wall or floor a stone-like depth that a flat tile cannot match. Rollence sells this surface as DG Matt + Carving, in GVT for floors and walls and in PGVT for walls, made at its factory in Matel, Wankaner, Morbi, Gujarat, as part of its porcelain tile range.

DG Matt + Carving is one of eight Rollence finishes. It builds on the DG Matt base, which is the flat digital glaze, and adds the carved relief on top. Matt carving tiles suit buyers who want a surface with character and some grip, and the design list on the site can be filtered by finish to show which patterns carry it. Every tile absorbs 0.5% water or less.

In the Morbi market, carving tiles in GVT sell at about Rs. 60 to Rs. 140 per sq.ft and PGVT at Rs. 70 to Rs. 180 per sq.ft, so one 800x1600 mm (2.6x5.2 ft) GVT tile costs about Rs. 830 to Rs. 1,900. These are market reference ranges and not a Rollence quote. A textured surface can take longer to lay and clean, so budget for labour at Rs. 15 to Rs. 60 per sq.ft.

The Finish

What Carving Tiles Are

The word carving describes the surface, not the body. A carved relief is pressed or etched into the glaze so that parts of the pattern sit higher than others. Light falls across the raised and lowered parts and creates shadow, so a plain stone or wood effect looks three-dimensional. Under a light fitted close to the wall, the effect is strongest.

The surface sits on the same dense GVT body as the flat matt finish, with water absorption of 0.5% or less. Texture changes how the tile feels and looks, and it does not change how much water the body takes in.

Versus High Gloss

Carving Tiles vs High Gloss: Opposite Ends of the List

No two Rollence finishes are further apart than carving tiles and high gloss tiles. One is raised, rough and quiet, and the other is flat, smooth and reflective. Placing them in the same room can work well when the high gloss tile is on the floor and the carved tile is on one wall.

Point DG Matt + Carving High Gloss
Touch Raised relief, grippy Smooth, slippery when wet
Light Absorbs and shades it Reflects it sharply
Marks Hide well, dirt can sit in grooves Show at once
Wet or outdoor floors Only if the design is rated R10 or R11 Never
Note

High Gloss should not be used on wet or outdoor floors because it turns slippery when wet.

Best Uses

Where Carving Tiles Work Best

Feature walls are the best use. A carved tile behind a bed, sofa or reception desk gives the room a focal point, and a long format such as 800x1600 mm tiles lets one tile run most of the way up a wall with a single vertical joint. One tile measures 13.8 sq.ft, so 100 mยฒ needs 79 pieces.

Entrances, passages and shop fronts also suit this finish when they are dry and covered, since the texture gives some grip underfoot. Verandas under a roof can use them too, provided the design has a slip rating.

Grip

Carving Floor Tiles: Grip, Dirt and Wet Areas

Texture adds grip, but it is not a rating. Two carved designs can behave very differently when wet, depending on how deep and how sharp the relief is. The Rollence site advises a DIN 51130 rating of R10 or R11 for wet and external floors, so ask for that figure on the exact design before laying it on a balcony, and check the ISO 9001:2015 certificate and test records for the batch.

Note

Carving tiles should not be used on bathroom, balcony or terrace floors unless the exact design is rated R10 or R11, because texture alone does not prove grip.

The raised pattern also holds dirt. In the monsoon, mud carried in on shoes settles into the grooves, so use a stiff nylon brush and use epoxy grout in the joints, since cement grout stains easily in a textured surface.

Price

Carving Tiles Price and Quantity

Carving tiles price depends on design, size and city more than on the carving itself. A 600x1200 mm (2x4 ft) GVT tile of 7.8 sq.ft costs about Rs. 470 to Rs. 1,100. A tile calculator turns a room size into a tile count, and adding 10% allows for cuts and breakage.

Order the whole quantity in one go, because shade and relief can vary between production runs, and a textured surface makes a mismatch more visible than on a flat tile.

Layout

Pairing and Layout

Keep the rest of the room quiet. A carved wall next to a plain matt floor lets the texture do the work, and a second busy pattern would fight it. For a floor-to-ceiling effect with fewer joints, use a long tile. Tall wall sizes are sold as large format GVT and PGVT.

Use full-coverage adhesive with a notched trowel, and set each tile with its relief running in the same direction. Check the pattern against the next tile before the adhesive grabs.

Plan Your Order

Book Relief Samples

You cannot judge a relief from a photograph, so hold a real piece and see how it takes the light in your own room. Rollence Granito ships free samples to the door, then quotes for the size, collection, quantity and city you name in the enquiry form.

Request Samples
Quick Facts

Quick Facts on Carving Tiles from Morbi

What is the carving tiles price in Morbi?

An 800x1600 mm (2.6x5.2 ft) carving GVT tile from the Morbi market costs about Rs. 60 to Rs. 140 per sq.ft, roughly Rs. 830 to Rs. 1,900 per tile, and 79 tiles cover 100 m². The body absorbs 0.5% water or less. PGVT costs Rs. 70 to Rs. 180 per sq.ft and is for walls only. These are market ranges, not a Rollence quote.

Does this finish suit a Gujarat monsoon?

This finish suits a Gujarat monsoon on walls and covered, dry floors, because the body absorbs 0.5% water or less, the BIa limit under IS 15622. A 600x1200 mm (2x4 ft) tile on an open balcony needs an R10 or R11 rating. Morbi factories make GVT at Rs. 60 to Rs. 140 per sq.ft, and epoxy grout keeps dirt out of the joints.

FAQ

Questions About DG Matt + Carving Tiles

What are carving tiles?

Carving tiles are matt tiles with a carved relief on the surface, so the pattern can be felt as well as seen. The texture gives depth and some grip. Rollence sells them as DG Matt + Carving in GVT for floors and walls and in PGVT for walls only.

Are carving tiles good for floors?

Yes, on dry floors such as entrances and passages, where the texture adds grip underfoot. They collect dirt in the grooves, so they need a brush. For wet areas, ask for the DIN 51130 rating of the exact design, and look for R10 or R11 before laying.

Is a carved tile slippery?

A carved tile is less slippery than a glossy one, but texture is not a slip rating. Grip depends on how deep the relief is. Ask for an R10 or R11 figure before using any carved design on a bathroom, balcony or terrace floor. Glossy tiles should never go there.

How do I clean a carved tile?

Sweep first, then scrub with a stiff nylon brush and a neutral cleaner so dirt comes out of the grooves. Rinse with clean water and dry the floor. Avoid acid cleaners, which attack grout. Epoxy grout in the joints stays clean far longer than cement grout.

What is the price of carving tiles per sq.ft?

Carving tiles in GVT cost about Rs. 60 to Rs. 140 per sq.ft in the Morbi market. PGVT costs Rs. 70 to Rs. 180 per sq.ft. Laying labour adds Rs. 15 to Rs. 60 per sq.ft. Prices change with design, size and city, and they are market ranges, not a Rollence quote.

Can I use a carved tile in a bathroom?

Yes, on walls, where the texture adds depth and there is no slip risk. On the floor, only a design rated R10 or R11 is suitable. Use GVT for the floor, since PGVT is a wall tile and must never be laid on floors, and seal every joint with epoxy grout.

Which sizes do carving tiles come in?

Rollence makes tiles from 600x600 mm to 1200x2800 mm. The design list on the site can be filtered by finish and size to see what carries the carved surface. Sizes of 1200x1800 mm and above are sold as large format GVT and PGVT. Ask for the exact sizes of your design.

Keep Exploring

Related Rollence Pages