Hi there ๐
Need help? Search our help center for answers or start a conversation:
Help Center
New Conversation
We typically reply in a few minutes
Select Emoji
Quick Enquiry
We'll get back to you within 24 hours
1200x1800 mm tiles are Rollence's featured large format, 4x6 ft each, and they are the size most often chosen when a floor is meant to look almost jointless. A single 1200x1800 mm tile covers 2.16 mยฒ, more than the footprint of a single bed, which is why showrooms, hotel lobbies and minimal-grout commercial specifications start here. The 1200x1800 mm tile belongs to the same factory range as Rollence's porcelain tiles at Matel, Wankaner, Morbi, Gujarat, though it is sold as large format GVT for floors and walls and as large format PGVT for walls.
One 1200x1800 mm tile covers 2.16 mยฒ (23.3 sq.ft), so 100 mยฒ needs only 47 tiles and the grout run falls to about 139 m. The Stonique collection is listed in this size, and Rollence makes eight finishes in six collections. Every tile absorbs 0.5% water or less.
Large format tiles in the wider Indian market are quoted at about Rs. 150 to Rs. 600 per sq.ft, which puts one 1200x1800 mm tile at roughly Rs. 3,500 to Rs. 14,000. These are market reference ranges and not a Rollence quote. Laying labour for this format sits at the top of the Rs. 15 to Rs. 60 per sq.ft range, so budget for both the tile and the fixing.
1200x1800 mm tiles are best for large, open floors: showrooms, hotel and office lobbies, big living halls and any space where the specification asks for minimal grout lines. A 6 m by 9 m hall is 54 mยฒ and takes exactly 25 tiles in a five by five grid, with no cuts at all. That kind of clean fit is the real strength of the size.
On a 100 mยฒ floor the tile count falls to 47, against 139 for 600x1200 mm and 278 for 600x600 mm, and the grout run falls from about 250 m to 139 m. Fewer joints means less grout to stain and less cleaning, which is why facility managers favour the format. The Stonique collection is listed in this size, so the Stonique collection can carry one design across the floor.
Cost per piece is high, so plan carefully. One 1200x1800 mm tile of 23.3 sq.ft costs roughly Rs. 3,500 to Rs. 14,000 at the wider market band. Order about 10% extra on a clean grid and 15% on a diagonal or cut-heavy layout, and keep one unopened tile per 50 mยฒ for repairs.
Compared with 1200x1200 mm tiles, the 1200x1800 mm tile cuts the tile count from 70 to 47 per 100 mยฒ and the grout run from 167 m to 139 m, at the same 1.2 m width. The square is easier to carry and fit in small halls, and the rectangle gives a longer, more directional floor.
| Size (mm) | Alias (ft) | Tiles per 100 m² | Grout run per 100 m² | Typical use |
|---|---|---|---|---|
| 1200x1800 This size | 4x6 | 47 | About 139 m | Showrooms, large halls |
| 1200x1200 | 4x4 | 70 | About 167 m | Lobbies, showrooms |
| 800x1600 | 2.6x5.2 | 79 | About 188 m | Large living areas, walls |
| 1200x2400 | 4x8 | 35 | About 125 m | Commercial lobbies, wall spans |
| 1200x2800 | 4x9.2 | 30 | About 119 m | Largest wall and floor spans |
Against 800x1600 mm, the grout run drops from 188 m to 139 m, but the tile is heavier and needs a flatter base and more labour. Against 1200x2400 mm, it is easier to handle and fits more rooms. A hall needs to be at least 3.6 m long to take two whole 1800 mm lengths.
Rollence makes 1200x1800 mm in large format GVT and large format PGVT. GVT carries a digital print under a hard glaze and goes on floors and walls, so it is the category for lobbies, showrooms and halls. PGVT has a polished surface and is made for walls only, which suits a reception backdrop, a lift lobby or a feature wall.
| Category | Surface | Where it goes | Water absorption |
|---|---|---|---|
| Large format GVT | Digital print under a hard glaze | Floors and walls | 0.5% or less |
| Large format PGVT | Polished glaze surface | Walls only | 0.5% or less |
PGVT should not be used on floors, wet or dry, because the polished surface turns slippery when wet and shows scuffs under foot traffic.
A tile this big shows a weak body quickly, because a tile that absorbs moisture curls at its ends. Every batch goes through quality testing to the ISO 10545 series before dispatch, and the water absorption figure of 0.5% or less is a measured result.
Rollence lists eight finishes, and the design list on the site shows which are made in 1200x1800 mm. The table sets out where the main four belong for a 4x6 ft tile.
| Finish | Best placed | Keep away from |
|---|---|---|
| DG Matt | Halls, living areas, offices, corridors | Wet or outdoor floors unless rated R10 or R11 |
| Glossy | Dry showrooms, lobbies and walls | Bathroom floors, balconies |
| High Gloss | Dry reception areas and feature walls | Bathroom floors, balconies, outdoors |
| GHR + Punch | Wet areas and semi-covered floors | Rooms that need a smooth, wipe-clean surface |
In a showroom under spotlights, high gloss tiles in 1200x1800 mm double the light on the floor and make products look brighter. In homes the same finish needs daily cleaning, so matt is the safer choice for most families.
Glossy and High Gloss finishes should not be used on outdoor or wet floors because they turn slippery when wet.
Entrance lobbies in Gujarat take wet footprints through the monsoon, so use matt or textured GVT near the door, rated R10 or R11 under DIN 51130. Fill the joints with epoxy grout, because a cement joint beside a large tile stains first.
Showrooms, hotel lobbies, hospital entrances and office atriums use 1200x1800 mm tiles because the floor reads as a few big panels and needs very little joint maintenance. Large homes use the size for a living hall or a double-height entrance, laid on a flat, well-prepared screed.
Rollence has dedicated export pages for this size for Iraq and Egypt, and overseas project buyers use the format for the same lobbies and halls. Rollence ships to its export markets in full 20 ft and 40 ft HQ container loads from Mundra, Kandla or Nhava Sheva.
Avoid 1200x1800 mm in small rooms, in bathrooms and anywhere the access route cannot take a 1.8 m tile. Use 600x600 mm or 600x1200 mm there instead.
The base must be flat. Check it with a 2 m straightedge, grind down any high spot, and fill dips with a levelling compound. Use full-coverage adhesive with back-buttering, never dab fixing, because voids under a 4x6 ft tile crack it under load. Levelling clips on every joint keep the corners even.
Two or three trained workers should carry each tile on its long edge, with suction lifters for placement. Plan the access route before delivery, since a 1.8 m tile cannot turn a tight staircase. Add 10% wastage to the room area before dividing by tile coverage, and a tile calculator does the sum for any room.
Cut with a bridge saw or a long-bed cutter, and drill relief holes at inside corners. Allow wider movement joints at doorways and in long runs, and keep traffic off the floor until the adhesive has cured fully.
A 1200x1800 mm tile is a project-level choice, so settle the hall size, the finish and the access route before the quantity. Samples cost nothing from Rollence Granito and arrive at your door, and the quotation is prepared against size, finish, collection, quantity and destination city. Give those five details in the enquiry form, with the floor plan dimensions if you have them.
A 1200x1800 mm large format tile (4x6 ft) from Morbi is priced against a wider market band of Rs. 150 to Rs. 600 per sq.ft, which is roughly Rs. 3,500 to Rs. 14,000 per tile, and 47 tiles cover 100 m². The body absorbs 0.5% water or less. Laying adds about Rs. 15 to Rs. 60 per sq.ft, at the top of that range for this size.
A matt 1200x1800 mm (4x6 ft) GVT floor suits Gujarat's humid monsoon because the body absorbs 0.5% water or less, the BIa limit under IS 15622, and a matt glaze grips when damp. Morbi factories make it, and epoxy grout seals the joints, with 52 tiles per 100 m² including wastage at Rs. 150 to Rs. 600 per sq.ft in the market band.
A 1200x1800 mm tile is about 4x6 ft, or 120x180 cm. It covers 2.16 m², which is 23.3 sq.ft. Rollence makes it as large format GVT for floors and walls and as large format PGVT for walls only, and features it among its main sizes.
You need 47 tiles of 1200x1800 mm for 100 m², plus about 10% extra, so order 52. Each tile covers 2.16 m², so 100 divided by 2.16 gives 46.3, rounded up. The same floor needs 79 tiles at 800x1600 mm and 139 tiles at 600x1200 mm.
Yes, large format GVT in 1200x1800 mm suits floors in lobbies, showrooms and large halls, on a flat base. Never use PGVT on a floor, because it is a polished wall tile. Use matt or textured GVT near entrances, and fill joints with epoxy grout.
Large format tiles are quoted at about Rs. 150 to Rs. 600 per sq.ft in the wider Indian market. One 1200x1800 mm tile of 23.3 sq.ft therefore costs roughly Rs. 3,500 to Rs. 14,000. Laying adds Rs. 15 to Rs. 60 per sq.ft. These are market ranges and not a Rollence quotation.
Back-buttering fills the ribs and voids on the tile back, so adhesive covers the whole tile. A 4x6 ft tile with hollow patches cracks under load or a dropped object. Spread adhesive on the floor with a notched trowel, butter the back, and press the tile down firmly.
Yes, a 1200x1800 mm tile is heavy and awkward, and it flexes if carried flat. Two or three workers should carry it on its long edge, and suction lifters help set it level. Check staircase turns and lift doors before delivery, because a 1.8 m tile cannot pass most of them.
Yes, Rollence exports 1200x1800 mm tiles direct from the factory without a trading intermediary. Containers ship from Mundra, Kandla or Nhava Sheva on FOB, CFR or CIF terms, in 20 ft or 40 ft HQ loads. Iraq and Egypt have dedicated pages for this size.
Product Inquiry
Fill in your details and we'll get back to you