Hi there ๐
Need help? Search our help center for answers or start a conversation:
Help Center
New Conversation
We typically reply in a few minutes
Select Emoji
Quick Enquiry
We'll get back to you within 24 hours
800x1600 mm tiles are where large format begins in the Rollence range, and they are one of the three sizes the factory features first. At 2.6x5.2 ft, an 800x1600 mm tile makes a floor look like a few long planks of stone rather than a grid, which is why architects reach for it in living areas and hotel-style lobbies. Rollence makes 800x1600 mm tiles in GVT for floors and walls and in PGVT for walls, as part of its porcelain tile range from Matel, Wankaner, Morbi, Gujarat.
One 800x1600 mm tile covers 1.28 mยฒ (13.8 sq.ft), so 100 mยฒ needs only 79 tiles and the grout run falls to about 188 m. The Stonique collection is listed in this size, and Rollence makes eight finishes in six collections. Every tile absorbs 0.5% water or less.
In the Morbi market, 800x1600 mm GVT tiles sell at about Rs. 60 to Rs. 140 per sq.ft and PGVT at Rs. 70 to Rs. 180 per sq.ft, so one GVT tile costs about Rs. 830 to Rs. 1,900. These are market reference ranges and not a Rollence quote. In feet the size is 2.6x5.2 ft, and it is the practical entry point for buyers asking for big tiles for floor.
This size is best for living areas, open plan homes and lobbies of 25 mยฒ or more, where its length reduces visible joints to a handful. It is the right first step for a buyer moving up from 600x1200 mm, because it keeps the same long proportion at a larger scale. Among large format tiles, 800x1600 mm is also the easiest to handle, which is why contractors who are new to the format start here.
A 30 mยฒ living area needs 24 tiles before wastage and 26 with 10% added, so the whole floor needs fewer pieces than a 10 mยฒ room does in 600x600 mm (28 tiles). That also means fewer tile boxes on the delivery truck, and fewer joints for monsoon damp to reach.
Because each tile in this size covers 13.8 sq.ft, a break costs about Rs. 830 to Rs. 1,900 at GVT market rates. Order two spare tiles from the same batch, since a later lot may differ slightly in shade.
Compared with 800x800 mm tiles, this size halves the piece count from 157 to 79 per 100 mยฒ and cuts the grout run from 250 m to about 188 m. The width stays the same, so a room that suits one will suit the other, and the choice comes down to how much of a plank-like look you want.
| Size (mm) | Alias (ft) | Tiles per 100 m² | Grout run per 100 m² | Typical use |
|---|---|---|---|---|
| 800x1600 This size | 2.6x5.2 | 79 | About 188 m | Large living areas, walls |
| 600x1200 | 2x4 | 139 | About 250 m | Living rooms, bedrooms |
| 800x800 | 2.6x2.6 | 157 | About 250 m | Open living and dining |
| 1200x1200 | 4x4 | 70 | About 167 m | Lobbies, showrooms |
| 1200x1800 | 4x6 | 47 | About 139 m | Showrooms, large halls |
Against 1200x1800 mm, this size is lighter and easier to carry, with a grout run of about 188 m against 139 m. A room needs to be at least 3.2 m wide to show four whole 800 mm widths across, and 4.8 m wide to take four whole 1200 mm widths.
Rollence makes 800x1600 mm tiles in GVT and PGVT. GVT carries a digital print under a hard glaze and goes on floors and walls. PGVT has a polished surface and is made for walls only, so PGVT suits a feature wall, a reception backdrop or a column cladding, while the floor beside it uses GVT.
| Category | Surface | Where it goes | Water absorption |
|---|---|---|---|
| GVT | Digital print under a hard glaze | Floors and walls | 0.5% or less |
| PGVT | Polished glaze surface | Walls only | 0.5% or less |
PGVT should not be used on floors, wet or dry, because the polished surface turns slippery when wet and shows scuffs under foot traffic.
Long tiles show a weak body fast, because a tile that absorbs moisture will curl at its ends. That is why every batch goes through quality testing to the ISO 10545 series before dispatch, with water absorption measured at 0.5% or less.
Rollence lists eight finishes, and the Stonique collection is listed in 800x1600 mm. For other designs, filter the design list on the site by size. The table shows where the main four belong for an 800x1600 mm tile.
| Finish | Best placed | Keep away from |
|---|---|---|
| DG Matt | Living areas, bedrooms, offices | Wet or outdoor floors unless rated R10 or R11 |
| Glossy | Dry lobbies and feature walls | Bathroom floors, balconies |
| High Gloss | Dry reception areas and walls | Bathroom floors, balconies, outdoors |
| GHR + Punch | Wet areas and balconies | Rooms that need a smooth, wipe-clean surface |
Most homes laying 800x1600 mm tiles choose matt finish tiles, because a long glossy surface shows every smudge and shoe mark across several metres. A matt surface also reads as natural stone, which suits the plank-like scale of the format.
Glossy and High Gloss finishes should not be used on outdoor or wet floors because they turn slippery when wet.
On a balcony or terrace, use a textured tile rated R10 or R11 under DIN 51130 and epoxy grout in the joints. Gujarat's monsoon keeps outdoor floors wet for weeks, and a cement joint beside a long tile stains and cracks first.
Living rooms and open plan homes get the most from 800x1600 mm tiles, because the long tile makes the room feel wider when laid across its width and longer when laid along it. Hotels, clinics and offices use the same size for corridors, where a long tile runs with the direction of travel and has very few joints.
For feature walls, a 2.4 m wall takes one full 1600 mm tile and one 800 mm cut piece in height, so place the cut at the skirting line where it is hidden. The Stonique collection is listed in this size, which lets a bedroom floor and a wall use one design.
Avoid 800x1600 mm tiles in small bathrooms and kitchens under about 8 mยฒ, where long tiles waste material on cuts and cannot follow a drain slope. Use 600x600 mm there.
Large tiles need a flat base. Check the screed with a long straightedge and grind down high spots, because a hump under a 1.6 m tile cracks it under load. Use full-coverage adhesive with back-buttering instead of dab fixing, so no voids sit under the tile.
Use levelling clips on every joint and keep the joints even. Two workers should carry each tile on its long edge, and suction cups help set it level. Check the access route first, since a 1.6 m tile has to pass staircase turns and lift doors.
Order 10% extra for a straight layout and 15% for diagonal laying. A tile calculator turns room dimensions into tile counts in one step. Cut with a bridge saw or a long-bed cutter, and relieve inside corners to avoid cracks.
This tile is long enough that a single sample does not show the full pattern run, so ask for the design and look at the sample against a wall of the same length. Samples come free from Rollence Granito and reach your door, and each quotation rests on size, finish, collection, quantity and destination city. Put those five details into the enquiry form.
An 800x1600 mm GVT tile (2.6x5.2 ft) from the Morbi market costs about Rs. 60 to Rs. 140 per sq.ft, which is roughly Rs. 830 to Rs. 1,900 per tile, and 79 tiles cover 100 m². The body absorbs 0.5% water or less. PGVT in this size costs Rs. 70 to Rs. 180 per sq.ft, or about Rs. 960 to Rs. 2,500 per tile, for walls only.
Epoxy grout is the right choice for 800x1600 mm (2.6x5.2 ft) tiles in Gujarat's humid monsoon, because long joints take up water and stain in cement grout. These GVT tiles from Morbi absorb 0.5% water or less, the BIa limit under IS 15622, and cost Rs. 60 to Rs. 140 per sq.ft, with 87 tiles per 100 m² including wastage.
An 800x1600 mm tile is about 2.6x5.2 ft, or 80x160 cm. It covers 1.28 m², which is 13.8 sq.ft. Rollence makes this size in GVT for floors and walls and in PGVT for walls, and lists the Stonique collection in it.
You need 79 tiles of 800x1600 mm for 100 m², and about 87 with 10% wastage. Each tile covers 1.28 m², so 100 divided by 1.28 gives 78.1, rounded up. The grout run on that floor is about 188 m, against 250 m for 600x1200 mm.
800x1600 mm tiles suit bathroom walls, and bathroom floors only in large rooms. Use PGVT or GVT on walls. On floors use matt or textured GVT with an R10 or R11 rating, never PGVT. Small bathrooms do better with 600x600 mm tiles, and every joint should be filled with epoxy grout.
Yes, use full-coverage tile adhesive with back-buttering, not dab fixing. A 1.6 m tile with voids underneath cracks under load. Use a notched trowel, levelling clips and a flat screed. Cement-sand dab fixing is not suitable, because it leaves hollow patches beneath the long tile.
An 800x1600 mm GVT tile costs Rs. 60 to Rs. 140 per sq.ft in the Morbi market. PGVT costs Rs. 70 to Rs. 180 per sq.ft. One GVT tile of 13.8 sq.ft therefore costs about Rs. 830 to Rs. 1,900. Prices change with design, finish and region, and they are not a Rollence quotation.
You can, but it wastes tile in rooms under about 8 m². Long tiles leave small off-cuts that cannot be reused, and cutting around fixtures is harder. In a small room use 600x600 mm or 600x1200 mm, and keep 800x1600 mm for living areas and corridors.
Lay the long side along the longest wall or toward the main light source. This stretches the room visually and keeps the cut at the narrow end. Use a one third offset if you stagger the joints, because long tiles bow slightly along the length.
Product Inquiry
Fill in your details and we'll get back to you