Hi there ๐
Need help? Search our help center for answers or start a conversation:
Help Center
New Conversation
We typically reply in a few minutes
Select Emoji
Quick Enquiry
We'll get back to you within 24 hours
No products found.
โ View all productsCarving tiles are matt tiles with a surface that has been carved into a relief, so the pattern is something you can feel with your hand and not only see. The texture catches light at an angle and gives a wall or floor a stone-like depth that a flat tile cannot match. Rollence sells this surface as DG Matt + Carving, in GVT for floors and walls and in PGVT for walls, made at its factory in Matel, Wankaner, Morbi, Gujarat, as part of its porcelain tile range.
DG Matt + Carving is one of eight Rollence finishes. It builds on the DG Matt base, which is the flat digital glaze, and adds the carved relief on top. Matt carving tiles suit buyers who want a surface with character and some grip, and the design list on the site can be filtered by finish to show which patterns carry it. Every tile absorbs 0.5% water or less.
In the Morbi market, carving tiles in GVT sell at about Rs. 60 to Rs. 140 per sq.ft and PGVT at Rs. 70 to Rs. 180 per sq.ft, so one 800x1600 mm (2.6x5.2 ft) GVT tile costs about Rs. 830 to Rs. 1,900. These are market reference ranges and not a Rollence quote. A textured surface can take longer to lay and clean, so budget for labour at Rs. 15 to Rs. 60 per sq.ft.
The word carving describes the surface, not the body. A carved relief is pressed or etched into the glaze so that parts of the pattern sit higher than others. Light falls across the raised and lowered parts and creates shadow, so a plain stone or wood effect looks three-dimensional. Under a light fitted close to the wall, the effect is strongest.
The surface sits on the same dense GVT body as the flat matt finish, with water absorption of 0.5% or less. Texture changes how the tile feels and looks, and it does not change how much water the body takes in.
No two Rollence finishes are further apart than carving tiles and high gloss tiles. One is raised, rough and quiet, and the other is flat, smooth and reflective. Placing them in the same room can work well when the high gloss tile is on the floor and the carved tile is on one wall.
| Point | DG Matt + Carving | High Gloss |
|---|---|---|
| Touch | Raised relief, grippy | Smooth, slippery when wet |
| Light | Absorbs and shades it | Reflects it sharply |
| Marks | Hide well, dirt can sit in grooves | Show at once |
| Wet or outdoor floors | Only if the design is rated R10 or R11 | Never |
High Gloss should not be used on wet or outdoor floors because it turns slippery when wet.
Feature walls are the best use. A carved tile behind a bed, sofa or reception desk gives the room a focal point, and a long format such as 800x1600 mm tiles lets one tile run most of the way up a wall with a single vertical joint. One tile measures 13.8 sq.ft, so 100 mยฒ needs 79 pieces.
Entrances, passages and shop fronts also suit this finish when they are dry and covered, since the texture gives some grip underfoot. Verandas under a roof can use them too, provided the design has a slip rating.
Texture adds grip, but it is not a rating. Two carved designs can behave very differently when wet, depending on how deep and how sharp the relief is. The Rollence site advises a DIN 51130 rating of R10 or R11 for wet and external floors, so ask for that figure on the exact design before laying it on a balcony, and check the ISO 9001:2015 certificate and test records for the batch.
Carving tiles should not be used on bathroom, balcony or terrace floors unless the exact design is rated R10 or R11, because texture alone does not prove grip.
The raised pattern also holds dirt. In the monsoon, mud carried in on shoes settles into the grooves, so use a stiff nylon brush and use epoxy grout in the joints, since cement grout stains easily in a textured surface.
Carving tiles price depends on design, size and city more than on the carving itself. A 600x1200 mm (2x4 ft) GVT tile of 7.8 sq.ft costs about Rs. 470 to Rs. 1,100. A tile calculator turns a room size into a tile count, and adding 10% allows for cuts and breakage.
Order the whole quantity in one go, because shade and relief can vary between production runs, and a textured surface makes a mismatch more visible than on a flat tile.
Keep the rest of the room quiet. A carved wall next to a plain matt floor lets the texture do the work, and a second busy pattern would fight it. For a floor-to-ceiling effect with fewer joints, use a long tile. Tall wall sizes are sold as large format GVT and PGVT.
Use full-coverage adhesive with a notched trowel, and set each tile with its relief running in the same direction. Check the pattern against the next tile before the adhesive grabs.
You cannot judge a relief from a photograph, so hold a real piece and see how it takes the light in your own room. Rollence Granito ships free samples to the door, then quotes for the size, collection, quantity and city you name in the enquiry form.
An 800x1600 mm (2.6x5.2 ft) carving GVT tile from the Morbi market costs about Rs. 60 to Rs. 140 per sq.ft, roughly Rs. 830 to Rs. 1,900 per tile, and 79 tiles cover 100 m². The body absorbs 0.5% water or less. PGVT costs Rs. 70 to Rs. 180 per sq.ft and is for walls only. These are market ranges, not a Rollence quote.
This finish suits a Gujarat monsoon on walls and covered, dry floors, because the body absorbs 0.5% water or less, the BIa limit under IS 15622. A 600x1200 mm (2x4 ft) tile on an open balcony needs an R10 or R11 rating. Morbi factories make GVT at Rs. 60 to Rs. 140 per sq.ft, and epoxy grout keeps dirt out of the joints.
Carving tiles are matt tiles with a carved relief on the surface, so the pattern can be felt as well as seen. The texture gives depth and some grip. Rollence sells them as DG Matt + Carving in GVT for floors and walls and in PGVT for walls only.
Yes, on dry floors such as entrances and passages, where the texture adds grip underfoot. They collect dirt in the grooves, so they need a brush. For wet areas, ask for the DIN 51130 rating of the exact design, and look for R10 or R11 before laying.
A carved tile is less slippery than a glossy one, but texture is not a slip rating. Grip depends on how deep the relief is. Ask for an R10 or R11 figure before using any carved design on a bathroom, balcony or terrace floor. Glossy tiles should never go there.
Sweep first, then scrub with a stiff nylon brush and a neutral cleaner so dirt comes out of the grooves. Rinse with clean water and dry the floor. Avoid acid cleaners, which attack grout. Epoxy grout in the joints stays clean far longer than cement grout.
Carving tiles in GVT cost about Rs. 60 to Rs. 140 per sq.ft in the Morbi market. PGVT costs Rs. 70 to Rs. 180 per sq.ft. Laying labour adds Rs. 15 to Rs. 60 per sq.ft. Prices change with design, size and city, and they are market ranges, not a Rollence quote.
Yes, on walls, where the texture adds depth and there is no slip risk. On the floor, only a design rated R10 or R11 is suitable. Use GVT for the floor, since PGVT is a wall tile and must never be laid on floors, and seal every joint with epoxy grout.
Rollence makes tiles from 600x600 mm to 1200x2800 mm. The design list on the site can be filtered by finish and size to see what carries the carved surface. Sizes of 1200x1800 mm and above are sold as large format GVT and PGVT. Ask for the exact sizes of your design.
Product Inquiry
Fill in your details and we'll get back to you