Hi there ๐
Need help? Search our help center for answers or start a conversation:
Help Center
New Conversation
We typically reply in a few minutes
Select Emoji
Quick Enquiry
We'll get back to you within 24 hours
No products found.
โ View all productsGLR tiles are the finish code you will find on a Rollence design sheet when the surface is shiny, and they follow the same rule as every shiny tile: dry interiors and walls only. The code is a trade name, so what matters to a buyer is what the surface does on the floor, how it compares with the other seven finishes, and which rooms it suits. Rollence makes GLR tiles in GVT for floors and walls and in PGVT for walls, at its factory in Matel, Wankaner, Morbi, Gujarat, as part of its porcelain tile range.
GLR is one of eight Rollence finishes, listed with DG Matt, Glossy, High Gloss, DG Matt + Carving, GHR + Punch, Marble and Papermatt. People who search for glossy floor tiles often land on a code like this, and the design list on the site can be filtered by finish to show which patterns carry it. Every GLR tile absorbs 0.5% water or less.
In the Morbi market, GLR GVT sells at about Rs. 60 to Rs. 140 per sq.ft and PGVT at Rs. 70 to Rs. 180 per sq.ft, so one 600x600 mm (2x2 ft) GVT tile costs about Rs. 230 to Rs. 540. These are market reference ranges and not a Rollence quote. Large sizes cost more, and big formats across the Indian market run from Rs. 150 to Rs. 600 per sq.ft.
The eight finishes fall into three groups. DG Matt and Papermatt are flat. DG Matt + Carving and GHR + Punch are textured for grip or depth. Glossy, High Gloss, Marble and GLR are the shiny group, where the sheen varies from soft to mirror. GLR tiles belong to the shiny group, so they take the shiny group rules.
A tile code is only a starting point. Two designs in the same finish can differ in how bright the shine is and how much grip they have, and the design sheet has the details.
The marble finish is chosen for the pattern, a printed vein that copies natural stone. GLR is chosen for the surface, a shiny glaze that can carry any pattern. A design can be both, with a marble print under a shiny GLR glaze. When a design carries both names, the sheen rule of the shinier one applies.
| Point | GLR | Marble |
|---|---|---|
| What the name describes | The surface sheen | The printed look |
| Wet or outdoor floors | Never, it is slippery when wet | Never if the design is shiny |
| Walls | Safe, in GVT or PGVT | Safe, in GVT or PGVT |
| Dry living room floor | Yes | Yes |
GLR and other shiny finishes should not be used on bathroom, balcony or terrace floors because they turn slippery when wet. PGVT should not be used on any floor.
Dry living rooms, offices, clinics and showrooms are the natural homes for GLR tiles. Shiny glaze adds light to a room that gets little daylight, which is useful in a flat with a single window. Glossy flooring also makes a small room look larger, because the floor reflects the walls.
Big rooms gain from big tiles. A 1200x2400 mm tile of 31.0 sq.ft needs 35 pieces per 100 mยฒ with a grout run of about 125 m, and it is sold as large format GVT and PGVT. Across the Indian market, one tile this size costs about Rs. 4,700 to Rs. 18,600 at Rs. 150 to Rs. 600 per sq.ft.
Keep glossy floor tiles design choices out of bathrooms, balconies, terraces and any floor that gets wet from rain, a hose or a wash area. A Gujarat monsoon soaks open floors for weeks, and a shiny surface is slippery whenever it is wet. The Rollence site advises a matt or textured finish rated R10 or R11 for these floors.
Walls are different. A shiny tile on a bathroom wall carries no slip risk, and the body absorbs 0.5% water or less. The care and maintenance routine for a shiny wall is simple: a damp cloth and a neutral cleaner.
Look at four things on the design sheet. The sheen, so you know how bright the surface is. The size, since not every design comes in every size. The body, GVT for floors and walls or PGVT for walls only. And the water absorption figure, which should read 0.5% or less. A buyer who has these four facts can compare designs fairly.
For a large order, also check the pieces per box in the packing details, because a shiny tile chipped at the corner shows the damage clearly and is hard to hide in a layout.
Use full-coverage adhesive, levelling clips and narrow joints, since shiny tiles show lippage and wide joints. Match the grout to the tile and use epoxy grout near any wet area. A tile calculator turns a 30 mยฒ room into 84 tiles of 600x600 mm before wastage, and 10% extra allows for cuts.
Clean with a microfibre mop and a neutral cleaner, then dry. Avoid acid cleaners, which dull the shine, and sweep grit before mopping so it does not scratch the glaze.
Shine varies from one design to another, so see the exact piece before you fix a large quantity. Rollence Granito supplies free samples and quotes against the size, collection, quantity and destination city on your enquiry form.
A 600x600 mm (2x2 ft) GLR GVT tile from the Morbi market costs about Rs. 60 to Rs. 140 per sq.ft, roughly Rs. 230 to Rs. 540 per tile, and 278 tiles cover 100 m². The body absorbs 0.5% water or less. PGVT costs Rs. 70 to Rs. 180 per sq.ft, or about Rs. 270 to Rs. 700 per tile, and is for walls only. These are market ranges, not a Rollence quote.
The GLR finish is safe indoors in a Gujarat monsoon as long as the floor stays dry, because the body absorbs 0.5% water or less, the BIa limit under IS 15622. A 1200x2400 mm (4x8 ft) wall tile is a large format size sold as GVT and PGVT. Morbi GVT starts at Rs. 60 to Rs. 140 per sq.ft, and epoxy grout seals the joints.
GLR tiles carry the GLR finish code on a Rollence design sheet, which marks a shiny surface in the glossy family. Rollence makes GLR in GVT for floors and walls and in PGVT for walls only. The body absorbs 0.5% water or less. Check each design sheet for the exact sheen.
No, GLR tiles should not be used on bathroom floors because shiny surfaces turn slippery when wet. Use a textured tile rated R10 or R11 on the floor. GLR tiles are fine on bathroom walls, where there is no slip risk, with epoxy grout in the joints.
No, this finish is not suitable for balconies, terraces, pool surrounds or external paving. The Rollence site advises a matt or textured finish with an R10 or R11 rating outdoors. A Gujarat monsoon keeps open floors wet for weeks, and shiny tiles are slippery then.
Both are shiny, and both follow the dry room rule. They are separate finish codes in the Rollence list, so a design sheet may carry one or the other. Check the sheet for the sheen and recommended use, and compare a real sample of each in your own room.
Sweep grit first, then mop with a neutral cleaner and a microfibre cloth, and dry the floor straight away. Avoid acid cleaners and scouring pads, which dull the shine. Mats at entrances and felt pads under furniture reduce scratches on a shiny glaze.
GLR GVT costs about Rs. 60 to Rs. 140 per sq.ft in the Morbi market. PGVT costs Rs. 70 to Rs. 180 per sq.ft. Laying labour adds Rs. 15 to Rs. 60 per sq.ft. Prices change with design, size and city, and they are market ranges, not a Rollence quote.
No, PGVT is a polished wall tile and must not be laid on any floor, wet or dry. It is slippery and scuffs under foot traffic. Use GVT in the GLR finish for dry floors, and keep PGVT for walls, where its shine is safe.
Product Inquiry
Fill in your details and we'll get back to you