Hi there ๐
Need help? Search our help center for answers or start a conversation:
Help Center
New Conversation
We typically reply in a few minutes
Select Emoji
Quick Enquiry
We'll get back to you within 24 hours
1200x2400 mm tiles are 4x8 ft large format tiles, the size of a standard board, and they are used where a wall or floor span needs to look like one continuous panel. The 1200x2400 mm tile belongs to the same factory range as Rollence's porcelain tiles at Matel, Wankaner, Morbi, Gujarat, though it is sold as large format GVT for floors and walls and as large format PGVT for walls.
One 1200x2400 mm tile covers 2.88 mยฒ (31.0 sq.ft), so 100 mยฒ needs only 35 tiles and the grout run falls to about 125 m, among the lowest in the range. Rollence makes eight finishes in six collections, and the design list on the site can be filtered by size to show what is made in 1200x2400 mm. Each tile absorbs 0.5% water or less.
Large format tiles in the wider Indian market are quoted at about Rs. 150 to Rs. 600 per sq.ft, which puts one 1200x2400 mm tile at roughly Rs. 4,700 to Rs. 18,600. These are market reference ranges and not a Rollence quote. Searchers often type this size as 4x8 tiles, and laying labour sits at the top of the Rs. 15 to Rs. 60 per sq.ft range.
1200x2400 mm tiles are best for commercial lobbies, lift cladding, long reception walls and big halls where large size tiles let one panel replace a dozen small ones. The 2.4 m length runs a full 8 ft wall height in a single piece, and the 1.2 m width keeps the wall bay proportioned like a door-height panel.
The size fits modular rooms with no cutting. A 4.8 m wide, 2.4 m high lift lobby wall takes exactly four tiles, and a 7.2 m by 9.6 m hall takes 24 tiles in a six by four grid. Those clean fits are what an architect looks for, because they remove cut pieces at the edges. A layout that starts from the room module wastes the least of these large format tiles.
Cost per piece is high. One 1200x2400 mm tile of 31.0 sq.ft costs roughly Rs. 4,700 to Rs. 18,600 at the wider market band, so keep two spare tiles from the same batch on every commercial job and plan the delivery route before ordering.
Compared with 1200x1800 mm tiles, the 1200x2400 mm tile cuts the tile count from 47 to 35 per 100 mยฒ and the grout run from 139 m to 125 m, at the same 1.2 m width. The longer tile is heavier and needs more workers, so choose it when the room length is a multiple of 2.4 m.
| Size (mm) | Alias (ft) | Tiles per 100 m² | Grout run per 100 m² | Typical use |
|---|---|---|---|---|
| 1200x2400 This size | 4x8 | 35 | About 125 m | Commercial lobbies, wall spans |
| 1200x1800 | 4x6 | 47 | About 139 m | Showrooms, large halls |
| 800x2400 | 2.6x7.9 | 53 | About 167 m | Tall feature walls, corridors |
| 800x3000 | 2.6x9.8 | 42 | About 158 m | Single piece tall walls |
| 1200x2800 | 4x9.2 | 30 | About 119 m | Largest wall and floor spans |
Against 800x2400 mm, the 1200x2400 mm tile is wider and covers more area per piece, which suits broad wall bays, while the narrower tile suits slim bays and passages. Against 1200x2800 mm, it is shorter and easier to carry through ordinary doorways.
Rollence makes 1200x2400 mm in large format GVT and large format PGVT. GVT carries a digital print under a hard glaze and goes on floors and walls, so it is the category for lobby floors and halls. PGVT has a polished surface and is made for walls only, which suits lift cladding and reception walls.
| Category | Surface | Where it goes | Water absorption |
|---|---|---|---|
| Large format GVT | Digital print under a hard glaze | Floors and walls | 0.5% or less |
| Large format PGVT | Polished glaze surface | Walls only | 0.5% or less |
PGVT should not be used on floors, wet or dry, because the polished surface turns slippery when wet and shows scuffs under foot traffic.
At 2.4 m a tile that absorbs moisture will curl at its ends, so every batch goes through quality testing to the ISO 10545 series before dispatch, with water absorption measured at 0.5% or less. Architects specifying this size should ask for that result in the submittal file.
Rollence lists eight finishes, and the design list on the site shows which are made in 1200x2400 mm. The table sets out where the main four belong for a 4x8 ft tile.
| Finish | Best placed | Keep away from |
|---|---|---|
| DG Matt | Halls, corridors, offices, feature walls | Wet or outdoor floors unless rated R10 or R11 |
| Glossy | Dry lobbies and reception walls | Bathroom floors, balconies |
| High Gloss | Dry feature walls in lit lobbies | Bathroom floors, balconies, outdoors |
| GHR + Punch | Wet areas and semi-covered floors | Rooms that need a smooth, wipe-clean surface |
Glossy finish tiles in 1200x2400 mm turn a lobby wall into a reflective panel, and the few joints keep the reflection clean. Because the panel is large, any ripple in the wall behind it shows in the reflection, so the wall must be flat to a tight tolerance.
Glossy and High Gloss finishes should not be used on outdoor or wet floors because they turn slippery when wet.
On a floor near an entrance, use matt or textured GVT rated R10 or R11 under DIN 51130, with epoxy grout in the joints. Gujarat's heavy monsoon rain is carried indoors on footwear, and glossy surfaces become hazardous.
Hotel lobbies, office reception areas, hospital entrances and mall atriums use 1200x2400 mm tiles for walls and floors, where the long panels make the space look continuous and need very little grout maintenance. Large villas use the size for a double-height entrance or a feature wall behind a staircase.
Rollence ships factory-direct container loads, and its exports to Iraq discharge at Umm Qasr and Basra with inland delivery to Baghdad, Erbil and Sulaymaniyah. Overseas project buyers should confirm size availability for their order with the factory before fixing the schedule.
Avoid 1200x2400 mm in small rooms, bathrooms and any building where the access route cannot take a 2.4 m tile. In those spaces, 600x1200 mm or 800x800 mm gives the same modern look with less risk.
A 4x8 ft tile needs a flat floor or plumb wall, checked with a 2 m straightedge and corrected before laying. Use full-coverage adhesive with back-buttering, levelling clips on every joint, and props to hold wall tiles until the adhesive cures. A hollow patch under a tile this size will crack it.
Three or four trained workers should carry each tile on its long edge, with suction lifters for placement. Add 10% wastage to the room area before dividing by tile coverage, and a tile calculator handles the sum. Plan the delivery path first, because a 2.4 m tile cannot turn a tight staircase.
Cut with a bridge saw or CNC waterjet and drill relief holes at inside corners. Allow movement joints at doorways and in long runs, and keep traffic off the floor until the adhesive is fully cured.
For a 4x8 ft tile, write down the module of the room first, because a layout with no cut pieces wastes the least tile. Rollence Granito ships free samples to your door, and each quotation is prepared from the size, finish, collection, quantity and destination city. Fill in those five details on the enquiry form.
A 1200x2400 mm large format tile (4x8 ft) from Morbi is priced against a wider market band of Rs. 150 to Rs. 600 per sq.ft, which is roughly Rs. 4,700 to Rs. 18,600 per tile, and 35 tiles cover 100 m². The body absorbs 0.5% water or less. Laying adds about Rs. 15 to Rs. 60 per sq.ft, at the top of that range.
A 1200x2400 mm (4x8 ft) tile copes with Gujarat's humid monsoon because the body absorbs 0.5% water or less, the BIa limit under IS 15622, and epoxy grout seals the long joints. Morbi factories make the size, and 39 tiles including wastage cover 100 m² at Rs. 150 to Rs. 600 per sq.ft in the market band.
A 4x8 ft tile is about 1200x2400 mm, or 120x240 cm. It covers 2.88 m², which is 31.0 sq.ft. Rollence makes this size as large format GVT for floors and walls and as large format PGVT for walls only. It is the footprint of a standard board.
You need 35 tiles of 1200x2400 mm for 100 m², plus about 10% extra, so order 39. Each tile covers 2.88 m², so 100 divided by 2.88 gives 34.7, rounded up. The grout run on that floor is about 125 m.
Yes, 1200x2400 mm tiles are well suited to walls, in PGVT or GVT. One tile runs a full 2.4 m wall height with no horizontal joint. Fix them with full-coverage adhesive, support them with props until cured, and keep the wall flat to a tight tolerance.
Large format tiles are quoted at about Rs. 150 to Rs. 600 per sq.ft in the wider Indian market. One 1200x2400 mm tile of 31.0 sq.ft therefore costs roughly Rs. 4,700 to Rs. 18,600. Laying adds Rs. 15 to Rs. 60 per sq.ft. These are market ranges and not a Rollence quotation.
No, PGVT is a polished wall tile and should not be laid on any floor, wet or dry. The polished surface turns slippery when wet and shows scuffs under foot traffic. Use GVT for floors and keep PGVT 1200x2400 mm tiles for walls and cladding.
Carry it on its long edge with three or four workers and suction lifters, never flat. A 2.4 m tile flexes and cracks if lifted flat. Plan the route before delivery, because it will not fit most lifts or turn a tight staircase. Use an A-frame trolley for longer carries.
Choose 1200x2400 mm when the room module is a multiple of 2.4 m, and 1200x1800 mm when it is a multiple of 1.8 m. The longer tile has a shorter grout run, 125 m against 139 m per 100 m², but it is heavier and costs more to replace.
Product Inquiry
Fill in your details and we'll get back to you